Send document comments to nexus7k-feedback-doc@cisco.com
2-370
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
LICMGR Messages
Error Message LICMGR-2-LOG_LIC_USAGE: Feature [chars] is using [dec] licenses out
of [dec] licenses installed. Please make sure enough licenses are installed for
the VEMs
Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web
site http://www.cisco.com/tac.
Recommended Action Licensing.
Error Message LICMGR-2-LOG_LIC_VENDOR_DOWN: License file contains invalid SERVER
line. Vendor daemon down
Explanation Vendor daemon is down.
Recommended Action Licensing.
LICMGR-3
Error Message LICMGR-3-LOG_LIC_FILE_MISSING: License file(s) missing for feature
[chars].
Explanation One or more license files for feature [chars] are missing and must be reinstalled.
Recommended Action Install the license file to continue using the feature.
Error Message LICMGR-3-LOG_LIC_INVALID_HOSTID: Invalid license hostid VDH=[chars]
for feature [chars].
Explanation Feature [chars2] has a license with an invalid license hostid VDH=[chars1]. This can
occur if a supervisor module with licensed features for one switch was installed on another switch.
Recommended Action No action is required.
Error Message LICMGR-3-LOG_LIC_LICENSE_EXPIRED: Evaluation license expired for
feature [chars].
Explanation The named feature has exceeded its evaluation time period. Applications using the
license will be shut down after a grace period.
Recommended Action Install the license file to continue using the feature.
Error Message LICMGR-3-LOG_LIC_MESSAGE_ERROR: could not handle message: [chars] of
type [dec] from addr [dec]:[dec].
Explanation Could not handle a IPC message [chars] of type [dec1] sent by a component running on
node [dec2] with sap [dec3].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.