Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-121
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
DIAGCLIENT Messages
Error Message DIAGCLIENT-3-ONDEMAND_FAIL_EXCESS: Module <[dec]> Test <[chars]> has
failed more than <[dec]> number of times
Explanation Ondemand test has failed more than configured number of times.
Recommended Action Copy the error message exactly as it appears on the console, gather the output
of show tech-support, and contact your Cisco technical support representative with the gathered
information.
Error Message DIAGCLIENT-3-PER_PORT_TEST_FAIL: Module <[dec]> Test <[chars]> has
failed on Ports <[chars]> Please use 'show diagnostic result <target>' to see test
results
Explanation Per Port Test has failed on the above all ports.
Recommended Action No action is required.
DIAGCLIENT-4
Error Message DIAGCLIENT-4-LC_OFFLINE_FOR_CURR_SLOT: Received LC offline event for
the current slot:[dec]. Ignoring it
Explanation Informational Syslog.
Recommended Action No action is required.
Error Message DIAGCLIENT-4-MTS_SEND_FAILURE: MTS send failed, mts_opc: [chars],
dest slot: [dec], dest SAP: [dec], error-id: [hex]
Explanation MTS send reports failure.
Recommended Action No action is required.
DIAGCLIENT-5
Error Message DIAGCLIENT-5-CALLOC_FAILURE: Memory allocation failed
Explanation DiagClient process could not allocate enough memory.
Recommended Action No action is required.
Error Message DIAGCLIENT-5-DIAG_SCHED_COMPLETE: Module <[dec]> Test <[chars]> has
completed Scheduled Testing
Explanation A scheduled Test was completed.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English