Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-602
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SME_CPP Messages
SLAB_LIB-3
Error Message SLAB_LIB-3-SLAB_ERR Format: Slab error [%s] in %s
Explanation An error has occurred in a call to the slab library.
Recommended Action No action is required.
SME_CPP Messages
This section contains the SME_CPP messages.
SME_CPP-2
Error Message SME_CPP-2-LOG_ERR_SME_CTRL_LUN_PATH_MISCONFIG: Control LUN [chars]
behind Host PWWN [chars] Tgt PWWN [chars] LUN Id [chars] has some lun paths that
are not configured.
Explanation A single LUN with multiple paths has some nonconfigured paths. Configure all LUN
paths.
Recommended Action No action is required.
Error Message SME_CPP-2-LOG_ERR_SME_DIFF_LUN_MISCONFIG: Lun [chars] and [chars]
behind Host PWWN [chars] Tgt PWWN [chars] LUN Id [chars] configured as one device.
Explanation Two different LUNs configured as one device. Please fix configuration.
Recommended Action No action is required.
Error Message SME_CPP-2-LOG_ERR_SME_LICENSE_EXPIRED: SME License expired -
Disabling [chars]
Explanation SAN Media Encryption License expired/not present - Disabling SME.
Recommended Action No action is required.
Error Message SME_CPP-2-LOG_ERR_SME_TAPE_LUN_PATH_MISCONFIG: Tape Drive [chars]
behind Host PWWN [chars] Tgt PWWN [chars] LUN Id [chars] has some lun paths that
are not configured.
Explanation A single LUN with multiple paths has some nonconfigured paths. Configure all LUN
paths.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English