Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-159
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ETH_PORT_CHANNEL Messages
ETH_PORT_CHANNEL-2
Error Message ETH_PORT_CHANNEL-2-RESET_MODULE: reset module [dec] for not
responding or returning error
Explanation A module is reset for not responding or returning error.
Recommended Action No action is required.
ETH_PORT_CHANNEL-3
Error Message ETH_PORT_CHANNEL-3-ALL_DROP_TIMEOUT: Some component(s) timed out on
dropping notif:[chars] (for:[chars]); Please collect <show system internal mts
buffers details>
Explanation A component did not respond to a request in a stipulated time.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message ETH_PORT_CHANNEL-3-COMPAT_CHECK_FAILURE: [chars] is not compatible
Explanation Compatibility check failed when adding ports to port channel.
Recommended Action Make sure the compatibility parameters are consistent while adding ports to
port channel, or use force option.
Error Message ETH_PORT_CHANNEL-3-GENERAL_ERROR: [chars]
Explanation General error.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-3-LACP_ERROR: [chars] [chars]
Explanation LACP error.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-3-MSG_SEND_FAILURE: failed to send [chars] to sap
[dec]: [chars]
Explanation The system has failed to send a message.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English