Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-358
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
L3VM Messages
Error Message L3VM-3-INVALID_ARG Format: invalid arguments - %s - in %s()
Explanation Invalid arguments passed in an l3vm function
Parameters: Invalid Argument, L3vm Function ...
Recommended Action No action is required.
Error Message L3VM-3-LIBAPI_FAILED Format: %s - failed in %s()
Explanation L3vm called an API that has failed
Parameters: Failed Operation, L3vm Function ...
Recommended Action No action is required.
Error Message L3VM-3-MTS Format: Error returned from %s, errno: 0x%08x (%s) in %s()
Explanation L3VM called an MTS API which returned an error.
Parameters: Failed API, Error Code, Error Description, L3vm Function ...
Recommended Action No action is required.
Error Message L3VM-3-NOMEM Format: Failed to allocate %s in %s()
Explanation L3VM has run out of memory. This can be caused by a general network or router
misconfiguration, or the router might not have enough memory installed.
Parameters: Allcated Data, L3vm Function ...
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message L3VM-3-PENDING_SDB_WRITE Format: SDB write operation is pending for
%s in %s()
Explanation L3VM discovered that there is a pending sdb operation
Parameters: Pending Key, L3vm Function ...
Recommended Action No action is required.
Error Message L3VM-3-PSS Format: Error returned from %s, errno: 0x%08x (%s) in %s()
Explanation L3VM called a PSS API which returned an error.
Parameters: Failed API, Error Code, Error Description, L3vm Function ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English