Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-496
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PM Messages
PM Messages
This section contains the PM messages.
PM-2
Error Message PM-2-STARTUP_FAILURE Format: Failed to %s during startup. error %d
Explanation A critical operation has failed during startup of the PM process.
Recommended Action No action is required.
PM-3
Error Message PM-3-API_FAILED Format: External API failed (%d)
Explanation External API failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PM-3-ARG_ERR Format: Argument error (%s): %s
Explanation An argument to a PM call is invalid.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PM-3-CLNT_FAILURE Format: Failed to %s from client
Explanation A PM client operation has failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PM-3-CPI_ERR Format: %s
Explanation A failure occurred in the communication with the CPI.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English