Send document comments to nexus7k-feedback-doc@cisco.com
2-349
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
L2FM Messages
Error Message KSINK-6-HA_UNINITIALIZED Format: ksink HA library not initialized, %s
invoked
Explanation Service should provide its own high availability switchover callbacks.
Recommended Action No action is required.
Error Message KSINK-6-MTS_UNK_OPC Format: Received unknown MTS message on %s queue
with opcode %d
Explanation URIB received an unknown message. The message is dropped.
Recommended Action No action is required.
L2FM Messages
This section contains the L2FM messages.
L2FM-0
Error Message L2FM-0-L2FM_CLI_INITIALIZATION_FAILED: CLI library initialization
failed!
Explanation Failed to initialize CLI infrastructure\sbackendlibrary.Thisisafatalerror.'
Recommended Action No action is required.
Error Message L2FM-0-L2FM_VDC_GWMAC_GET_FAILED: Failed to get gwmac for VDC
Explanation Failed to get gwmac for VDC.
Recommended Action No action is required.
Error Message L2FM-0-L2FM_WRITE_TO_PSS_FAILED_IN_PREVIOUS_INCARNATION: PSS Write
Failed in pervious incarnation. Stateful restart not possible
Explanation PSS Write Failed in pervious incarnation. Stateful restart not possible.
Recommended Action No action is required.