Send document comments to nexus7k-feedback-doc@cisco.com
2-214
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
FCSP-MGR Messages
FCSP-MGR-2
Error Message FCSP-MGR-2-DBG_INIT_FAILED: Debug Infrastructure Initialization
failed ( [chars] )
Explanation The system has detected an error.
Recommended Action No action is required.
Error Message FCSP-MGR-2-FC2_E_INIT_FAILED: Fibre-Channel Initialization of an
E_Port failed ( [chars] )
Explanation FC-SP Manager has been unable to initialize with the FC-2 E-Port infrastructure.
Recommended Action No action is required.
Error Message FCSP-MGR-2-FC2_F_INIT_FAILED: Fibre-Channel Initialization of an
F_Port failed ( [chars] )
Explanation FC-SP Manager has been unable to initialize with the FC-2 F-Port infrastructure.
Recommended Action No action is required.
Error Message FCSP-MGR-2-FC2_UNKNOWN_FRM_RECD_CRIT: Received an unexpected/unknown
FC-2 frame on [chars]
Explanation The system has detected an error.
Recommended Action No action is required.
Error Message FCSP-MGR-2-FCSP_AUTHENT_FAILURE: FC-SP Authentication failure on Port
[chars] (FC-SP Failure Reason: [chars] [chars])
Explanation Fibre-Channel Authentication failure on Port [chars].(Reason Code [chars] Detail
[chars]). Check password configurations and ensure appropriate security modes on this port as well
as peer port.
Recommended Action No action is required.
Error Message FCSP-MGR-2-FCSP_ESP_MISMATCH: ESP parameters mismatch failure on Port
[chars] (reason:[chars])
Explanation The system has detected a Fibre-Channel ESP parameters mismatch with the peer on
Port [chars].(Reason: [chars]). Check ESP configurations on both side of the link and ensure
appropriate ESP mode on this port as well as peer port.
Recommended Action No action is required.
To Next Page
Loading...
Need help?
General
