Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-134
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
DSTATS Messages
Error Message DPVM-4-FEATURE_DISABLED: [chars]
Explanation DPVM is unavailable and disabled now.
Recommended Action No action is required.
DPVM-6
Error Message DPVM-6-FEATURE_ENABLED: [chars]
Explanation DPVM is available and enabled now.
Recommended Action No action is required.
Error Message DPVM-6-INFO: [chars]
Explanation An error has occurred that affects DPVM. [chars] indicates the event.
Recommended Action No action is required.
DSTATS Messages
This section contains the DSTATS messages.
DSTATS-2
Error Message DSTATS-2-PSS_INIT_FAIL: pss initialization failed due to error: [hex]
Explanation Dstats process pss initialization failure due to error [hex].
Recommended Action Collect more information by using the show flash command. See the pss
system error codes for the information about the failure.
DSTATS-3
Error Message DSTATS-3-PSS_CREATE_FAIL: pss create runtime database failed due to
error: [hex]
Explanation Dstats process pss create runtime database failure due to error [hex].
Recommended Action Collect more information by using the show flash command. See the pss
system error codes for the information about the failure.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English