EasyManua.ls Logo

Cisco AP775A - Nexus Converged Network Switch 5010 - Npv-4; Npv-5

Cisco AP775A - Nexus Converged Network Switch 5010
886 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Send document comments to nexus7k-feedback-doc@cisco.com
2-421
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
NPV Messages
Error Message NPV-5-FLEXATTACH_VPWWN_UNASSIGNED: The virtual port WWN has been
unassigned from interface [chars]
Explanation The physical port WWN will be used as port WWN for devices logging in on this
interface.
Recommended Action No action is required.
Error Message NPV-5-FRAME_DISCARDED: [chars]
Explanation NPV process discarded an FC2 frame.
Recommended Action No action is required.
Error Message NPV-5-NPV_LOAD_BALANCE_REINIT: Server ports reinitialized : [chars]
Explanation Server ports are reinitialized to balance the loads on the external interfaces.
Recommended Action No action is required.
Error Message NPV-5-UNEXPECTED_EVENT: [chars]
Explanation NPV process has received an unexpected event in the current state.
Recommended Action No action is required.
NPV-6
Error Message NPV-6-ABTS_SENT: [chars]
Explanation NPV process sent an ABTS frame.
Recommended Action No action is required.
Error Message NPV-6-ELS_CMD_SENT_TO_CORE: [chars]
Explanation NPV process sent an ELS frame to the core switch.
Recommended Action No action is required.
Error Message NPV-6-ELS_CMD_SENT_TO_SRV: [chars]
Explanation NPV process sent an ELS frame to the server.
Recommended Action No action is required.

Table of Contents

Other manuals for Cisco AP775A - Nexus Converged Network Switch 5010

Related product manuals