Send document comments to nexus7k-feedback-doc@cisco.com
2-3
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ACL Messages
AAM-3
Error Message AAM-3-ALLOC_FAILED: Failed in File:[chars] Line:[dec] for type [dec]
size [dec]
Explanation The AAM process could not allocate heap memory in File:[chars], at line:[dec], for
memory-type:[dec] of Size:[dec].
Recommended Action No action is required.
Error Message AAM-3-ASSERTION_FAILED: Failed in File:[chars] Line:[dec]
Explanation AAM process assertion has failed in File:[chars], at line:[dec].
Recommended Action No action is required.
ACL Messages
This section contains the ACL messages.
ACL-2
Error Message ACL-2-ACL_HA_FAILURE: Failed to do high availability operation:
[chars].
Explanation The system has failed to do a high availability operation. [chars] is the reason.
Recommended Action No action is required.
Error Message ACL-2-ACL_INIT_FAILED: Initialization failed for ACL: [chars],
reason: [hex].
Explanation Initialization failed for ACL due to [chars], reason: [hex].
Recommended Action No action is required.
Error Message ACL-2-ACL_LINECARD_STATUS: Status from linecard: [dec], for module:
[chars](ID: [dec]), status : [dec], error_id: [hex], catastrophic: [chars],
restart count: [dec].
Explanation This message indicates that this message is a status from the line card [dec], for module:
[chars](ID: [dec]), status : [dec], error_id: [hex], catastrophic: [chars], restart count: [dec].
Recommended Action No action is required.
To Next Page
Loading...
