Send document comments to nexus7k-feedback-doc@cisco.com
2-31
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ARP Messages
Error Message ARP-3-ADJ_UPD Format: Failed to update adjacency for received packet
from %s on %s
Explanation Due to this failure, packet forwarding will continue to use the existing ARP adjacency
entry values.
Recommended Action No action is required.
Error Message ARP-3-API_MQ_INVAL Format: ARP API Error: Invalid ARP message queue
in %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No action is required.
Error Message ARP-3-API_MQ_SEND Format: ARP API Error: Failed to send %s to %s
queue: %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No action is required.
Error Message ARP-3-API_MTS_INVAL Format: ARP API Error: Invalid ARP MTS queue in %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No action is required.
Error Message ARP-3-API_MTS_SEND Format: ARP API Error: Failed to send %s to %s
queue: %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No action is required.
Error Message ARP-3-DUP_VADDR_SRC_IP Format: Source address of packet received from
%s on %s(%s) is duplicate of local virtual ip, %s
Explanation There may be another router on this network that is configured with the same IP
address.
Recommended Action Check all routers on the interface for a misconfiguration.
Error Message ARP-3-DUP_VADDR_SRCIP Format: Source address of packet received from
%s on %s is duplicate of local virtual ip, %s
Explanation There may be another router on this network that is configured with the same IP
address.
Recommended Action Check all routers on the interface for a misconfiguration.
To Next Page
Loading...
Need help?
General
