Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-361
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
LACP Messages
Error Message L3VM-6-UNKNOWN_SDB_CTX Format: L3VM received unknown gsdb context
0x%08x in %s()
Explanation L3VM process received ack for unknown operation on global database
Parameters: GSDB Context, L3vm Function ...
Recommended Action No action is required.
LACP Messages
This section contains the LACP messages.
LACP-3
Error Message LACP-3-GENERAL_ERROR: [chars]
Explanation General error.
Recommended Action No action is required.
Error Message LACP-3-LACP_MEM_PC_MISCFG: LACP misconfiguration detected on [chars]:
([chars] [dec]-[dec][chars] [dec]-[dec])
Explanation There was an LACP misconfiguration.
Recommended Action No action is required.
Error Message LACP-3-LACP_MISCFG: LACP misconfiguration detected on [chars]:
([chars])
Explanation There was an LACP misconfiguration.
Recommended Action No action is required.
Error Message LACP-3-LACP_SUSPEND_HALF_DUPLEX_PORT: Port [chars] is in half duplex
mode. suspend port
Explanation LACP is not supported in half duplex mode. Suspend port.
Recommended Action No action is required.
Error Message LACP-3-PACKET_TRANSMIT_ERR: [chars]: Could not send LACP packet
err=[dec]
Explanation There was an error in sending LACP packet.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English