Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-545
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PSS Messages
Error Message PROC_MGR-SLOT#-2-PROC_MGR_UT_SEM_GIVE_FAIL: ERROR:[chars] [dec]:
Failed to give utaker semaphore: [dec]
Explanation Utaker semaphore give failed.
Recommended Action Restart the line card.
Error Message PROC_MGR-SLOT#-2-PROC_MGR_UT_SEM_TAKE_FAIL: ERROR:[chars] [dec]:
Failed to take utaker semaphore: [dec]
Explanation Utaker semaphore take failed.
Recommended Action Restart the line card.
PROC_MGR-SLOT#-3
Error Message PROC_MGR-SLOT#-3-PROC_MGR_ERROR_MSG: [chars]
Explanation Process manager error message.
Recommended Action No action is required.
PROC_MGR-SLOT#-4
Error Message PROC_MGR-SLOT#-4-PROC_MGR_APP_NOT_RESP: ERROR: Process ([chars]) is
not responding, it will be terminated
Explanation Application not sending heartbeat.
Recommended Action Check the application.
PROC_MGR-SLOT#-6
Error Message PROC_MGR-SLOT#-6-PROC_MGR_INFO_MSG: [chars]
Explanation Process manager informationmessage.
Recommended Action No action is required.
PSS Messages
This section contains the PSS messages.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English