Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-244
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ICMPV6 Messages
ICMPV6-3
Error Message ICMPv6-3-API_FAILED Format: %s failed in %s()
Explanation An unexpected but manageable event has occurred.;.
Recommended Action No action is required.
Error Message ICMPv6-3-API_INTERFACE_FAILED Format: %s failed for %s in %s()
Explanation An unexpected but manageable event has occurred.;.
Recommended Action No action is required.
Error Message ICMPv6-3-BAD_INFO_RECEIVED Format: Invalid %s message type %d
received in %s()
Explanation An unexpected but manageable event has occurred.;.
Recommended Action No action is required.
Error Message ICMPv6-3-BITFIELD_FAILED Format: %s failed in %s
Explanation ICMPV6 process could not execute the bitfield operation.
Parameters: Bitfield operation, Function name ...
Recommended Action Dump core, then reload the stack.
Error Message ICMPv6-3-CV_INIT Format: Couldn't init cond var %s
Explanation An ICMPV6 process has failed to initialize a conditional-variable resource.
Parameters: Thread Name ...
Recommended Action Dump core, and then restart component.
Error Message ICMPv6-3-GROUP_PREFIX_IGNORE Format: Too many Groups in Group Prefix
%s. Specify the prefix within /120
Explanation The system has detected that the GPrefix yields too many groups.
Parameters: Group Prefix ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English