Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-19
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
AM Messages
Error Message ACLTCAM-4-ACL_TCAM_FLOW_COUNTER_VALIDATED: Flow counter for flow:
vsan: [dec], sid: [hex], did: [hex] is now valid
Explanation ACLTCAM process validated the flow counter for flow VSAN [dec] SID [hex] DID
[hex].
Recommended Action No action is required.
ACLTCAM-6
Error Message ACLTCAM-6-ACL_TCAM_STATUS: Status: [chars].
Explanation ACLTCAM status is reported as: [chars].
Recommended Action No action is required.
AM Messages
This section contains the AM messages.
AM-2
Error Message AM-2-API_INIT Format: Failed to initialize %s API
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message AM-2-BAD_TIMER Format: %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message AM-2-CLI_INIT Format: Failed to initialize CLI
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English