Send document comments to nexus7k-feedback-doc@cisco.com
2-362
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
LACP Messages
Error Message LACP-3-SYN_COLL_DIS_EN: [chars] [[chars]]: SYNC, COLLECT and
DISTRIBUTE flags enabled too early by partner
Explanation Potential interop issue. Partner system seems to have enabled synchronizationas well
collecting or distRIButing flags too early even before actor has selected an aggregator.
Recommended Action No action is required.
Error Message LACP-3-SYSTEM_MAC_ERR: [chars]: Could not get system mac[[chars]]
Explanation There was an error in acquiring system mac from VDC Mgr.
Recommended Action No action is required.
LACP-5
Error Message LACP-5-LACP_DISABLED: LACP Disabled
Explanation LACP service has been disabled.
Recommended Action No action is required.
Error Message LACP-5-LACP_ENABLED: LACP Enabled
Explanation LACP service has been enabled.
Recommended Action No action is required.
Error Message LACP-5-LACP_SUSPEND_INDIVIDUAL: LACP port [chars] of port-channel
[chars] not receiving any LACP BPDUs suspending (individual) port
Explanation LACP has suspended individual ports.
Recommended Action No action is required.
Error Message LACP-5-PORT_PRIORITY_CHANGED: [chars]: LACP port priority changed
from [dec] to [dec]
Explanation LACP port priority has been changed.
Recommended Action No action is required.
Error Message LACP-5-SYSTEM_PRIORITY_CHANGED: LACP system priority changed from
[hex] to [hex]
Explanation LACP system priority has been changed.
Recommended Action No action is required.