Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-502
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PMALLOC Messages
Error Message PMALLOC-3-MALLOC_FAILURE Format: Malloc failure in %s\n
Explanation In PMALLOC lib, Malloc failed.
Parameters: Function name ...
Recommended Action No action is required.
Error Message PMALLOC-3-NOT_ALLOCATED_SM_MALLOC_STR Format: %s failed in %s\n
Explanation In PMALLOC lib, invalid memory block/excess block request.
Parameters: Function name,Function name ...
Recommended Action No action is required.
Error Message PMALLOC-3-SEGMENT_NOT_INIT Format: Segment 0x%p not initialized for
memory checking\n
Explanation In PMALLOC lib, segment is not initialized for memory check ing.
Parameters: Shared memory segment ...
Recommended Action No action is required.
Error Message PMALLOC-3-SM_INIT_CHECKING Format: %s failed in %s\n
Explanation In PMALLOC lib, function failed to initialized.
Parameters: Function name,Function name ...
Recommended Action No action is required.
PMALLOC-6
Error Message PMALLOC-6-BLOCKED_MEMSEG_MUTEX Format: Blocked for memseg_mutex\n
Explanation In PMALLOC lib, process is blocked for memseg_mutex.
Recommended Action No action is required.
Error Message PMALLOC-6-LARGE_MEM Format: Large mem: shared %d\n
Explanation In PMALLOC lib, large memory requested.
Parameters: Shared memory segment ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English