Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-744
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
TTYD Messages
Error Message TSP-3-RWSEM_HAVE_LOCK_FAIL Format: rwsem_have_lock(sap=%u,
flags=%#x) err %#x - %s
Explanation Failed to query rwsem status.
Parameters: Lock SAP id, Flags, Error code, Error string ...
Recommended Action No action is required.
Error Message TSP-3-RWSEM_INIT_FAIL Format: rwsem_lib_init(vdc=%u, uuid=%u, tid=%u)
err %#x - %s
Explanation Failed to initialize rwsem.
Parameters: VDC id, UUID, TID, Error code, Error string ...
Recommended Action No action is required.
Error Message TSP-3-RWSEM_LOCK_FAIL Format: rwsem_lock_no_sig(%s SAP %u) failed: %s
Explanation Failed to lock rwsem.
Parameters: R/W, Lock SAP id, Error string ...
Recommended Action No action is required.
Error Message TSP-3-RWSEM_UNLOCK_FAIL Format: rwsem_unlock(%s SAP %u) failed: %s
Explanation Failed to unlock rwsem.
Parameters: R/W, Lock SAP id, Error string ...
Recommended Action No action is required.
TTYD Messages
This section contains the TTYD messages.
TTYD-2
Error Message TTYD-2-TTYD_ERROR: TTYD Error [chars]
Explanation Critical TTY daemon error.
Recommended Action No action is required.
Error Message TTYD-2-TTYD_MTS: TTYD Message queue [dec] [chars]
Explanation TTY daemon message error.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English