Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-732
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
TCP Messages
Error Message TCP-2-ATTACH Format: %s: Unable to attach to %s
Explanation Cannot attach shared memoty.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message TCP-2-COND_DESTROY Format: %s: pthread_cond_destroy failed, error %s
Explanation No system resources.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message TCP-2-COND_INIT Format: %s: pthread_cond_init failed, error %s
Explanation No system resources.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message TCP-2-COND_WAIT Format: %s: pthread_cond_wait failed, error %s
Explanation No system resources.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message TCP-2-DEREGISTER Format: %s: Unable to deregister to %s
Explanation Cannot deregister with component.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message TCP-2-ENQUEUE Format: %s: Unable to enqueue %s to %s
Explanation Cannot insert client structure in client list.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message TCP-2-LARGE_PKT Format: %s: Packet size greater than 65535 bytes, len
%d
Explanation Packet size greater than 65535 bytes.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English