Send document comments to nexus7k-feedback-doc@cisco.com
2-315
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ISIS Messages
Error Message ISAPI-SLOT#-7-MSM_DEBUG: [chars]
Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-7-NSP_DEBUG: [chars]
Explanation ISAPI-nsp software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-7-SSM_DEBUG: [chars]
Explanation ISAPI software messages.
Recommended Action No action is required.
Error Message ISAPI-SLOT#-7-SSN_DEBUG: [chars]
Explanation ISAPI software messages.
Recommended Action No action is required.
ISIS Messages
This section contains the ISIS messages.
ISIS-2
Error Message ISIS-2-AVL_FAIL Format: Add to CSNP cache failed: %s - %s
Explanation An unexpected but recoverable event has occurred.
Parameters: Start LSP-ID, End LSP-ID ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message ISIS-2-HOLDDOWN Format: Failed to enable process after sequence number
wrap holddown.
Explanation An unexpected but recoverable event has occurred.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.