Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-231
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
FWM Messages
Error Message FWM-1-FCFIB_HW_NO_VSAN: No hardware [chars] resources for route
creation to VSAN [dec]
Explanation Hardware does not have sufficient resources to create this route.
Recommended Action Delete unused VSANs.
Error Message FWM-1-FCFIB_HW_NO_VSAN_DOM: No hardware [chars] resources for route
creation to VSAN [dec] Domain [dec]
Explanation Hardware does not have sufficient resources to create this route.
Recommended Action Delete unused VSANs or assign common Domain numbers to existing
VSANs.
Error Message FWM-1-FCFIB_HW_PC_LIMIT: Failed to create [chars], hardware limit of
[dec] would be exceeded
Explanation The number of hardware SAN Port Channels is limited by the platform.
Recommended Action Configure fewer SAN Port Channels.
Error Message FWM-1-FCFIB_LICENSE_UNAVAILABLE: License: [chars] is not installed.
System will not provide FC switching.
Explanation Fibre Channel license is unavailable. The system will not provide FC switching.
Recommended Action Install the license file to continue using the feature.
FWM-2
Error Message FWM-2-FCFIB_CRIT: [chars]
Explanation Fcfib encountered a catastrophic error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message FWM-2-FWM_ASSERT_FAILURE: stack [[chars]]
Explanation Critical assertion has failed in forwarding manager.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English