Send document comments to nexus7k-feedback-doc@cisco.com
2-76
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
CERT_ENROLL Messages
Error Message CDP-6-NEIGHBOR_ADDED: Device [chars] discovered of type [chars] with
port [chars] on incoming port [chars] with ip addr [chars] and mgmt ip [chars]
Explanation The system discovered a neighbor device.
Recommended Action No action is required.
Error Message CDP-6-NEIGHBOR_REMOVED: CDP Neighbor [chars] on port [chars] has been
removed
Explanation The system deleted a neighbor device.
Recommended Action No action is required.
Error Message CDP-6-PORTDISABLE: CDP disabled on port [chars]
Explanation CDP was disabled on a given port. [chars] is the interface-ID string that identifies the
port.
Recommended Action No action is required.
Error Message CDP-6-PORTDOWN: A CDP enabled port [chars] went down.
Explanation A CDP enabled port became unoperational. [chars] is the interface-ID string that
identifies the port.
Recommended Action No action is required.
Error Message CDP-6-PORTENABLE: CDP enabled on port [chars]
Explanation CDP was enabled on a given port. [chars] is the interface-ID string that identifies the
port.
Recommended Action No action is required.
Error Message CDP-6-PORTUP: A CDP enabled port [chars] came up.
Explanation A CDP enabled port became operational. [chars] is the interface-ID string that
identifies the port.
Recommended Action No action is required.
CERT_ENROLL Messages
This section contains the CERT_ENROLL messages.