Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-743
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
TSP Messages
Error Message TSP-3-LOCK_MODE_CONFLICT Format: Lock mode conflict
Explanation Lock R/W mode conflct.
Recommended Action No action is required.
Error Message TSP-3-LOCK_RELEASE_ORDER Format: Lock release out of order
Explanation Releasing locks out of order.
Recommended Action No action is required.
Error Message TSP-3-LOCK_STACK_EMPTY Format: Lock stack empty
Explanation Lock stack is empty.
Recommended Action No action is required.
Error Message TSP-3-LOCK_STACK_FULL Format: Lock stack full
Explanation Lock stack is full.
Recommended Action No action is required.
Error Message TSP-3-MUTEX_LOCK_FAIL Format: pthread_mutex_lock() failed: %s
Explanation Failed to lock mutex.
Parameters: Error string ...
Recommended Action No action is required.
Error Message TSP-3-MUTEX_UNLOCK_FAIL Format: pthread_mutex_unlock() failed: %s
Explanation Failed to unlock mutex.
Parameters: Error string ...
Recommended Action No action is required.
Error Message TSP-3-RWSEM_CREATE_FAIL Format: rwsem_create(sap=%u, flags=%#x) err
%#x - %s
Explanation Failed to create rwsem.
Parameters: Lock SAP id, Flags, Error code, Error string ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English