Send document comments to nexus7k-feedback-doc@cisco.com
2-206
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
FCDOMAIN Messages
Error Message FCDOMAIN-7-FABRICCONFCOMPLETEDRCF: Disruptive reconfiguration
completed
Explanation A disruptive reconfiguration (RCF phase) of the VSAN has completed. This can happen
when two or more fabrics merged disruptively, or when the user manually triggered a disruptive
reconfiguration of the VSAN.
Recommended Action No action is required.
Error Message FCDOMAIN-7-FC2_RETRY: Retransmission of FC2 frame on interface
[chars] (Cmd Code: [hex])
Explanation Fcdomain is retrying an FC2 frame on interface [chars] due to loss/no response. The
Command Code of the frame is [hex].
Recommended Action No action is required.
Error Message FCDOMAIN-7-FCID_IN_USE_PURGING_FOR_FICON_MGR: FICON needs to purge
the persistent FCID table, but at least one FCID is still in use, preventing this
purge from completely remove all entries belonging to the VSAN.
Explanation There may be a problem in the sequence that shuts down all interfaces before fcdomain
receives a request from FICON Manager to purge the persistent FCID table.
Recommended Action No action is required.
Error Message FCDOMAIN-7-FSM_FAILED: FSM transition failed on interface [chars]
(current state [chars])
Explanation Fcdomain state machine generated an invalid event on interface [chars], for which no
proper action was defined (current state [chars].).
Recommended Action No action is required.
Error Message FCDOMAIN-7-FSM_FORBIDDEN_TRANSITION: fcdomain state machine has hit
a forbidden transition
Explanation Fcdomain state machine has tried to execute a forbidden transition.
Recommended Action No action is required.
Error Message FCDOMAIN-7-INTERFACERDY: Interface [chars] ready
Explanation The interface [chars] is ready.
Recommended Action No action is required.
To Next Page
Loading...
Need help?
General
