Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-89
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
COPP Messages
Error Message CMPPROXY-5-MALLOC_FAILURE: Memory allocation failure
Explanation Memory allocation in a call to malloc/calloc has failed.
Recommended Action No action is required.
CMPPROXY-6
Error Message CMPPROXY-6-LOG_CMP_AAA_SUCCESS: Authentication succeeded for a login
from CMP (on module [dec])
Explanation A login attempt has succeeded from Connectivity management processor (CMP) in
getting access as AAA succeeded.
Recommended Action No action is required.
COPP Messages
This section contains the COPP messages.
COPP-2
Error Message COPP-2-COPP_INIT_FAIL: CoPP Initialization failed: [chars]
Explanation CoPP Initialization failed. [chars] explains the reason for the failure.
Recommended Action No action is required.
Error Message COPP-2-COPP_MTS_FAIL: Failed to do MTS operation: [chars]
Explanation The system has failed to do an MTS operation. [chars] explains the reason for the
failure.
Recommended Action No action is required.
COPP-3
Error Message COPP-3-COPP_ALLOC_FAIL: Failed to alloc required memory: [chars]
Explanation Failed to allocateateate required memory. [chars] explains the reason for the failure.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English