Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-364
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
LC_PORT_CHANNEL-SLOT# Messages
Error Message LC_CFG-SLOT#-2-LC_CFG_EXITED: exited with code [dec]
Explanation Process lc_cfg_mgr exited.
Recommended Action No action is required.
Error Message LC_CFG-SLOT#-2-LC2_CPU_ERRORS: [chars], Total IC [dec], DC [dec], Tag
[dec], MBit [dec], SBit [dec], I30 [dec]
Explanation LC CPU Cache errors.
Recommended Action No action is required.
LC_PORT_CHANNEL-SLOT# Messages
This section contains the LC_PORT_CHANNEL-SLOT# messages.
LC_PORT_CHANNEL-SLOT#-0
Error Message LC_PORT_CHANNEL-SLOT#-0-HW_FAILURE: fatal error in configureing
[chars]: [chars]
Explanation Fatal hardware error in port channel configuration.
Recommended Action Reset the module.
Error Message LC_PORT_CHANNEL-SLOT#-0-IDX_FULL: D_IDX table full (current [dec],
new [dec], total [dec])
Explanation Programming error in port channel configuration.
Recommended Action Reset the module.
LC_PORT_CHANNEL-SLOT#-3
Error Message LC_PORT_CHANNEL-SLOT#-3-LC_PORT_CHANNEL_ERROR: [chars]
Explanation General error.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English