Send document comments to nexus7k-feedback-doc@cisco.com
2-160
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ETH_PORT_CHANNEL Messages
Error Message ETH_PORT_CHANNEL-3-NUM_ACTIVE_PORTS_ERROR: Port-channel:[chars]
active_nports [dec]; No member is active; Please collect <show tech-support
port-channel/ethpm>
Explanation The system has detected a number active ports error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message ETH_PORT_CHANNEL-3-PCM_HWCFG_FAIL_ERROR: Port-channel:[chars]
mbr:[chars] SAP [dec] returned error [chars] for opc [chars]; if lacp port-channel
please collect <show tech-support lacp all> or please collect <show tech-support
port-channel/ethpm>
Explanation The system has detected a hwcfg fail error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message ETH_PORT_CHANNEL-3-PCM_INTERNAL_ERROR: Port-channel:[chars]
mbr:[chars]; if lacp port-channel please collect <show tech-support lacp all> or
please collect <show tech-support port-channel/ethpm>
Explanation The system has detected a internal error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message ETH_PORT_CHANNEL-3-PCM_PORT_DOWN_IN_PC_UP_ERROR:
Port-channel:[chars] mbr:[chars]; if lacp port-channel please collect <show
tech-support lacp all> or please collect <show tech-support port-channel/ethpm>
Explanation The system has detected a port is down in pc_up. No bundle member is down.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message ETH_PORT_CHANNEL-3-PORT_CHANNEL_NOT_FOUND: [chars] is not found
Explanation Cannot find port channel in its database, which indicates an inconsistency with an
external component.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-3-RSP_TIMEOUT: Component [chars] timed out on
response to opcode:[chars] (for:[chars])
Explanation A component did not respond to a request in a stipulated time.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.