Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-2
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
AAM Messages
Error Message AAA-2-AAA_PROGRAM_EXIT: aaa daemon exiting: [chars]
Explanation The system has detected that the AAA daemon has exited.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
AAA-3
Error Message AAA-3-AAA_NVRAMFAILURE: nvram failure
Explanation The system has detected that because the NVRAM cannot be read/written to, the
accounting log cannot be stored in NVRAM.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
AAA-6
Error Message AAA-6-AAA_ACCOUNTING_MESSAGE: [chars]
Explanation This message indicates that this is an accounting message.
Recommended Action No action is required.
AAM Messages
This section contains the AAM messages.
AAM-2
Error Message AAM-2-ELS_FC2_GL_SINDEX_LOOKUP_FAILED: Failed to lookup global port
index for interface [[chars]]
Explanation The system has failed to look up a global port index for the interface [chars].
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English