Send document comments to nexus7k-feedback-doc@cisco.com
2-185
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
FC-TUNNEL Messages
Error Message FC-TUNNEL-3-PSS_RTDB_RESTORE_ERROR: Runtime database restoration for
[chars] failed with error [hex]
Explanation FCMPLS tunnel read the saved runtime database and has detected an error while
rebuilding the runtime database. [chars] describes the runtime database which the process tried to
restore and 0x[hex] is the system error code.
Recommended Action No action is required.
Error Message FC-TUNNEL-3-RIB_ERROR: RIB API, [chars], failed with error [hex]
Explanation FCMPLS tunnel invoked RIB API and received the error code. [chars] describes the
API and 0x[hex] specifies the error.
Recommended Action No action is required.
Error Message FC-TUNNEL-3-RSVP_PROTO_ERROR: RSVP protocol error: [chars]
Explanation RSVP-TE protocol error is encountered. [chars] describes the error and its context.
Recommended Action No action is required.
Error Message FC-TUNNEL-3-UNEXPECTED_MTS_MSG: Unexpected MTS message, opcode [dec],
is received
Explanation FCMPLS tunnel process received unexpected MTS event. MTS opcode is specified in
[dec].
Recommended Action No action is required.
FC-TUNNEL-5
Error Message FC-TUNNEL-5-MSG_INTERFACE_DOWN: Interface [chars] is down
Explanation The logical fc tunnel interface is down. This may be due to a reconfiguration on the fc
tunnel, or issues on the underlying physical interface.
Recommended Action If this is not due to a known reconfiguration, you should verify connectivity at
the physical port level, and then on the fc tunnel interface. Furthermore, verify the physical ports
along the fc tunnel path operate in the TE mode.
Error Message FC-TUNNEL-5-MSG_INTERFACE_UP: Interface [chars] is up
Explanation The fc interface is up.
Recommended Action No action is required.
To Next Page
Loading...
Need help?
General
