Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-250
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
IGMP Messages
Error Message IGMP-3-BF_CREATE Format: Couldn't create bitfield for %s
Explanation IGMP failed to create bitfield resource.
Parameters: Data type ...
Recommended Action Dump core, and and and then restart component.
Error Message IGMP-3-BITFIELD_FAILED Format: %s failed in %s
Explanation IGMP process could not execute the bitfield operation.
Parameters: Bitfield operation, Function name ...
Recommended Action Dump core, then reload the stack.
Error Message IGMP-3-CV_INIT Format: Couldn't init cond var %s
Explanation IGMP process failed to initialize a conditional-variable resource.
Parameters: Thread Name ...
Recommended Action Dump core, and then restart component.
Error Message IGMP-3-GETRLIMIT_FAILED Format: Address Space size retrieval failed,
reason %s
Explanation IGMP process could not retrieve memory resource limit.
Recommended Action No action is required.
Error Message IGMP-3-GROUP_PREFIX_IGNORE Format: Too many Groups in Group Prefix
%s. Specify the prefix within /24
Explanation GPrefix yields too many Groups
Parameters: Group Prefix ...
Recommended Action No action is required.
Error Message IGMP-3-GROUP_RANGE_IGNORE Format: Too many Groups in Group Range %s
- %s
Explanation The system has detected that the Group Range yields too many groups.
Parameters: Start Group, End Group ...
Recommended Action No action is required.
Error Message IGMP-3-HA_DB_REBUILD Format: HA run-time database buildup %s
Explanation IGMP-SNOOP stateful restart status
Parameters: State description ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English