Send document comments to nexus7k-feedback-doc@cisco.com
2-251
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
IGMP Messages
Error Message IGMP-3-HA_GROUP Format: HA %s operation in vlan %d failed for (%s, %s)
Explanation IGMP-SNOOP called a PSS API which returned an error.
Parameters: Operation type, Vlan-id, Group, Source ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IGMP-3-HA_OIF Format: HA %s operation on OIF %s for (%s, %s) in vlan
%d failed
Explanation IGMP-SNOOP called a PSS API which returned an error.
Parameters: Operation type, Interface, Group, Source, Vlan-id ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IGMP-3-HA_RPORT Format: HA %s operation on router-port %s for vlan %d
failed
Explanation IGMP-SNOOP called a PSS API which returned an error.
Parameters: Operation type, Interface, Vlan-id ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IGMP-3-HA_VLAN Format: HA %s operation for vlan %d failed
Explanation IGMP-SNOOP called a PSS API which returned an error.
Parameters: Operation type, Vlan-id ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IGMP-3-IGMP_INIT Format: IGMP init failed: %s
Explanation IGMP process initialization has failed.
Parameters: Failure reason ...
Recommended Action Dump core, and and and then restart component.
Error Message IGMP-3-IM_API_FAILED Format: %s failed in %s
Explanation IM API failed in MCEC IGMP Snoop.
Parameters: API name, Function name ...
Recommended Action No action is required.
To Next Page
Loading...
Need help?
General
