Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-816
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
WWN Messages
Error Message VSHD-4-VSHD_ROLE_DISTRIBUTE_FAILURE: Role distribution operation
([chars]) failed with error id [hex]
Explanation This is probably occurring due to unstable fabric.
Recommended Action Retry operation when fabric is stable.
VSHD-5
Error Message VSHD-5-VSHD_SYSLOG_CONFIG_CHANGE: VDC=[chars], VTY=[chars],
user=[chars], CMD=[chars]
Explanation Configuration change notification.
Recommended Action No action is required.
Error Message VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from vty by [chars] on
[chars]
Explanation CLI Configuration mode was exited.
Recommended Action No action is required.
Error Message VSHD-5-VSHD_SYSLOG_ROLE_CREATED: New cli role [chars] created
Explanation New cli role created.
Recommended Action No action is required.
VSHD-7
Error Message VSHD-7-VSHD_SYSLOG_PARSE_TREE_UPDATE: Parse tree [chars]
Explanation Parse tree updated in shell.
Recommended Action No action is required.
WWN Messages
This section contains the WWN messages.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English