Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-189
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
FCD Messages
FCD Messages
This section contains the FCD messages.
FCD-7
Error Message FCD-7-SB3_ABTS_EXCHANGE: sb3 aborted exchange [hex] from vsan:[dec]
ch:[hex] chi:[hex] ccw:[hex] token:[hex] cmd:[hex] reason:[chars]
state:[chars]:[dec]
Explanation SB3 aborted exchange due to reason given. Aborts are caused by either the channel or
control unit detecting a device protocol error. Recovery actions are performed to restore
communication. In certain circumstances aborts occur in normal operations.
Recommended Action No action is required if communication with CUP device is still operational.
Error Message FCD-7-SB3_UCS_PER_FILE_FN: VSAN:[dec] Unit Check for perform file
function, reason: [chars]
Explanation SB3 failed perform file function. Failure is caused by error in the file main frame sent
to director.
Recommended Action No action is required if communication with CUP device is still operational.
FCDD-SLOT# Messages
This section contains the FCDD-SLOT# messages.
FCDD-SLOT#-3
Error Message FCDD-SLOT#-3-LOG_FCDD_ERR: Nonrecoverable error - exiting: [chars]
Explanation Errors which cause program to exit occurred.
Recommended Action No action is required.
FCDD-SLOT#-4
Error Message FCDD-SLOT#-4-LOG_FCDD_WARNING: Warning!: [chars]
Explanation Serious errors which affect all normal operations occurred.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English