Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-95
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
DEBUGPROXY Messages
Error Message CTS-2-RBACL_UPDATE_FAILED: Failed to [chars] RBACL [chars]
Explanation The system has detected an error.
Recommended Action No action is required.
CTS-3
Error Message CTS-3-DOT1X_AUTHC_FAILED: DOT1X authentication failed on port:
[chars]
Explanation DOT1X authentication failed on the port.
Recommended Action No action is required.
CTS-5
Error Message CTS-5-CTS_IP_SGT_MAP_UPDATE: [chars] assigned SGT [dec]
Explanation The system has detected an error.
Recommended Action No action is required.
DEBUGPROXY Messages
This section contains the DEBUGPROXY messages.
DEBUGPROXY-6
Error Message DEBUGPROXY-6-SSM_DEBUG_PROXY_COMMON: SSM debug proxy [chars] [dec]
Explanation General SSM debug proxy information.
Recommended Action No action is required.
DEV_LOG Messages
This section contains the DEV_LOG messages.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English