Send document comments to nexus7k-feedback-doc@cisco.com
2-627
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
STP Messages
Error Message STP-6-MST_DIGEST: MST digest changed to [chars], pre-std digest
changed to [chars]
Explanation MST Region configuration has changed.
Recommended Action No user action is required.
Error Message STP-6-MST_PORT_BOUNDARY: Port [chars] [chars] as MST Boundary port
Explanation MST Boundary port status of the specified port is changed.
Recommended Action No user action is required.
Error Message STP-6-MST_PORT_PRE_STANDARD: Port [chars] [chars] as MST Pre-standard
port.
Explanation MST pre-standard status of the specified port is changed.
Recommended Action No user action is required.
Error Message STP-6-PORT_ADDED: Interface [chars], added to [chars] with role
[chars], state [chars], cost [dec], priority [dec], link-type [chars]
Explanation This spanning tree port has been added.
Recommended Action No user action is required.
Error Message STP-6-PORT_COST: Port [chars] instance [chars] cost changed to [dec]
Explanation The spanning tree port cost has changed for the specified port.
Recommended Action No user action is required.
Error Message STP-6-PORT_DELETED: Interface [chars], removed from [chars]
Explanation This spanning tree port has been deleted.
Recommended Action No user action is required.
Error Message STP-6-PORT_LINK_TYPE: Port [chars] instance [chars] link changed to
[chars]
Explanation The spanning tree port link type has changed for the specified port.
Recommended Action No user action is required.