Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-410
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
NFM Messages
Error Message NFM-2-MALLOC_ERROR: Function [chars]: Size [dec] bytes
Explanation The NFM service could not allocate enough memory.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message NFM-2-PSS_ERROR: [chars]: PSS ret. val=[dec]
Explanation The NFM service has detected an error while operating on a persistent storage database.
Recommended Action No action is required.
Error Message NFM-2-VERIFY_FAIL: Verify failed - Client [hex], Reason: [chars],
Interface: [chars]
Explanation The DDB Verify failed.
Recommended Action No action is required.
NFM-3
Error Message NFM-3-DDB_ERROR: DDB error: [chars]
Explanation The DDB has generated an error.
Recommended Action No action is required.
Error Message NFM-3-FEATURE_MANAGER_ERROR: [chars]: An error occurred processing a
Feature Manager msg - error [chars]
Explanation An error has occurred while processing a message from FEATURE Manager.
Recommended Action No action is required.
Error Message NFM-3-HANDLE_IN_USE: [chars]: name: [chars]
Explanation The NFM service encountered a handle that was in use while reading a persistent
storage database.
Recommended Action No action is required.
Error Message NFM-3-INVALID_HANDLE: [chars]: handle =[hex]
Explanation The NFM service encountered an invalid handle in a persistent storage database.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English