Send document comments to nexus7k-feedback-doc@cisco.com
2-672
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SYSLOG Messages
SYSLOG-2
Error Message SYSLOG-2-DT_TEST Format: Test Syslog facility: %s
Explanation The system has detected an error.
Recommended Action No action is required.
Error Message SYSLOG-2-DT_TEST_LIB Format: Test Syslog library facility: %s
Explanation The system has detected an error.
Recommended Action No action is required.
Error Message SYSLOG-2-SL_MSG_CRIT Format: %s
Explanation Syslog API Critical.
Recommended Action No action is required.
SYSLOG-3
Error Message SYSLOG-3-NOTSET Format: Trying to print uninitialized error message
Explanation An internal software error occurred.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message SYSLOG-3-SL_MSG_ERR Format: %s
Explanation Syslog API Error.
Recommended Action No action is required.
Error Message SYSLOG-3-TOOLONG Format: Error message too long: %s
Explanation An internal software error occurred.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.