Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-24
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
AM Messages
Error Message AM-3-MSG_TO_TLV Format: Notification message to TLV failed
Explanation An unexpected but recoverable error has occurred.
Recommended Action No action is required.
Error Message AM-3-MTS_DROP Format: MTS drop failed on %s queue: %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No action is required.
Error Message AM-3-MTS_SEND Format: Failed to send %s to %s queue: %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No action is required.
Error Message AM-3-NO_AF Format: %s: Unable to get address family block for index %d
Explanation An unexpected but recoverable error has occurred.
Recommended Action No action is required.
Error Message AM-3-NO_MEM Format: Malloc failed for %s %s
Explanation The system may be low on memory.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message AM-3-NO_PIB Format: Unable to get pib for client pid %d while
processing %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No action is required.
Error Message AM-3-NO_SMEM Format: Smalloc failed for %s %s
Explanation AM's shared memory quota may be used up, due to a large number of adjacencies or a
memory leak.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English