Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-23
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
AM Messages
Error Message AM-2-URIB_PIB Format: Unable to get pib for %s VRF from URIB
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
AM-3
Error Message AM-3-BAD_PARAMS Format: Called %s with address family %d, iod %d,
l3address %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No action is required.
Error Message AM-3-DEL_PROT_ADJ Format: Unable to delete protocol adjacency for %s,
uuid %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No action is required.
Error Message AM-3-MAC_REG_FAILED Format: Mac registration with L2FM failed for mac
%s, iod %s, phy iod: %s
Explanation MAC registration with L2FM failed.
Recommended Action No action is required.
Error Message AM-3-MAX_RETRIES Format: Notification retry limit exceeded for %s
Explanation Client is not replying to our notifications.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message AM-3-MQ_RECV Format: Message queue receive failed on %s queue: %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No action is required.
Error Message AM-3-MQ_SEND Format: Failed to send %s to %s queue: %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English