Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-457
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PIM6 Messages
PIM6 Messages
This section contains the PIM6 messages.
PIM6-2
Error Message PIM6-2-SHM_LOCK_CREAT Format: Failed to create shared memory lock: %s
Explanation The system has failed to initialize.
Parameters: Error Name ...
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message PIM6-2-STARTUP_DEBUG Format: %s in %s
Explanation The system has failed to initialize.
Parameters: Error, Function Name ...
Recommended Action No action is required.
PIM6-3
Error Message PIM6-3-ADD_ROUTE Format: Couldn't add PIM6 route %s in %s
Explanation PIM6 failed to update the local route-table entry.
Parameters: Addresses, Function Name ...
Recommended Action No action is required.
Error Message PIM6-3-API_CLOSE Format: Couldn't close %s API
Explanation PIM6 failed to close API opened with the component.
Parameters: Component Name ...
Recommended Action No action is required.
Error Message PIM6-3-API_FAILED Format: %s API failed in %s
Explanation API call has failed in PIM6.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English