Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-428
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
OSPF Messages
ORI_MAC-6
Error Message ORI_MAC-6-ORI_MAC_DEBUG_MSG: [chars]
Explanation Debug log message.
Recommended Action No action is required.
OSPF Messages
This section contains the OSPF messages.
OSPF-1
Error Message OSPF-1-INIT Format: Unable to %s %s
Explanation An internal software error occurred.
Parameters: Action, Error ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message OSPF-1-LOWMEM Format: Low memory condition: %s
Explanation The router did not have enough memory to store certain data structures.
Parameters: Error ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message OSPF-1-MCASTJOIN Format: Unable to join %s group on interface %s
Explanation An internal software error occurred.
Parameters: Multicast Group, Interface Id ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message OSPF-1-MCASTLEAVE Format: Unable to leave %s group on interface %s
Explanation An internal software error occurred.
Parameters: Multicast Group, Interface Id ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English