Send document comments to nexus7k-feedback-doc@cisco.com
2-258
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
IKE Messages
Error Message IGMP-6-RECEIVE_QUERY Format: Received %s interface %s from %s
Explanation IGMP version mismatch, query still processed.
Parameters: IGMP version mismatch, Interface, Source address ...
Recommended Action No action is required.
Error Message IGMP-6-RESERVE_LIMIT_WARNING Format: Exceeded 80% of the
reserve-limit for interface %s
Explanation Exceeded 80% of the reserve-limit for the interface
Parameters: Interface ...
Recommended Action No action is required.
Error Message IGMP-6-RESTART_SHUTDOWN Format: IGMP shutting self down via restart
command
Explanation IGMP process is shutting itself down due to the restart command.
Recommended Action No action is required.
Error Message IGMP-6-SHUTDOWN Format: IGMP shutting self down
Explanation IGMP process is shutting itself down.
Recommended Action No action is required.
Error Message IGMP-6-STATE_LIMIT_WARNING Format: Exceeded 80% of the state-limit
for interface %s
Explanation Exceeded 80% of the state-limit for the interface
Parameters: Interface ...
Recommended Action No action is required.
Error Message IGMP-6-UNKNOWN_OPC Format: Received unknown mts opcode %d
Explanation IGMP process received unknown Interprocess message, dropped.
Parameters: Operation Code ...
Recommended Action No action is required.
IKE Messages
This section contains the IKE messages.