Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-431
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
OSPF Messages
Error Message OSPF-3-HA_INTF Format: Unable to recreate interface %s
Explanation OSPF could not do stateful restart
Parameters: Interface Id ...
Recommended Action No action is required.
Error Message OSPF-3-HA_INTF_AREA Format: Unable to add interface %s to area %s
Explanation OSPF could not do stateful restart
Parameters: Interface Id, Area Id ...
Recommended Action No action is required.
Error Message OSPF-3-HA_LSDB_AREA Format: Unable to find LSA area %s
Explanation OSPF could not do stateful restart
Parameters: Area Id ...
Recommended Action No action is required.
Error Message OSPF-3-HA_LSDB_INSTALL Format: Unable to install LSA %s, area %s %s
Explanation OSPF could not do stateful restart
Parameters: LSA, Area Id, Interface Id ...
Recommended Action No action is required.
Error Message OSPF-3-HA_LSDB_LINK Format: Unable to find link LSA interface/area
Explanation OSPF could not do stateful restart.
Recommended Action No action is required.
Error Message OSPF-3-HA_LSID Format: Unable to reserve LSID %d for %s LSA %s
Explanation OSPF could not do stateful restart
Parameters: LSA type, Interface name ...
Recommended Action No action is required.
Error Message OSPF-3-HA_NBR Format: Unable to recreate neighbor %s
Explanation OSPF could not do stateful restart
Parameters: Neighbor Id ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English