Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-432
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
OSPF Messages
Error Message OSPF-3-HA_NBR_INTF Format: Unable to find interface index %ld for
neighbor %s
Explanation OSPF could not do stateful restart
Parameters: Interface Index, Neighbor Id ...
Recommended Action No action is required.
Error Message OSPF-3-HA_SR Format: Unable to recreate sr %d
Explanation OSPF could not do stateful restart
Parameters: Subrouter Id ...
Recommended Action No action is required.
Error Message OSPF-3-HEAPSIZE Format: Error increasing heap size to %d, error %d
Explanation Reduced heap size will limit the LSDB size.
Parameters: Size, Error ...
Recommended Action No action is required.
Error Message OSPF-3-INVALID_TLV Format: Found corrupted TLV, LSA %s
Explanation Error while parsing TLV.
Parameters: LSA ...
Recommended Action No action is required.
Error Message OSPF-3-ISSU_GR_DISABLED Format: Aborting ISSU, GR is disabled in %d
out of %d contexts Parameters: Contexts, Contexts ...
Explanation ISSU requires OSPF GR to be enabled for all contexts.
Recommended Action No action is required.
Error Message OSPF-3-ISSU_GR_FAILED Format: Aborting ISSU, GR failed in %d out of
%d contexts Parameters: Contexts, Contexts ...
Explanation ISSU requires successful OSPF GR in all contexts.
Recommended Action No action is required.
Error Message OSPF-3-ISSU_GR_IN_PROGRESS Format: Aborting ISSU, GR in progress in
%d out of %d contexts Parameters: Contexts, Contexts ...
Explanation ISSU requires stable OSPF topology in all contexts.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English