Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-433
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
OSPF Messages
Error Message OSPF-3-MAXIFS Format: Exceeded the limit on interfaces per area [i.e
%d]
Explanation Restricting the number of interfaces per area to avoid problems during lsa generation.
Parameters: Interface Limit ...
Recommended Action Reduce the number of interfaces per area.
Error Message OSPF-3-MAXLSAS Format: Maximum number of LSAs in domain has been
reached
Explanation The OSPF domain contains more LSAs than this router can store.
Recommended Action Redesign the network to redistRIBute less external routes into the OSPF
domain.
Error Message OSPF-3-MIB_FAIL Format: Failed to %s the MIB
Explanation Error while loading or unloading the MIB.
Parameters: action ...
Recommended Action No action is required.
Error Message OSPF-3-MTS_BIND Format: Error returned from mts_bind(), errno: %s
Explanation OSPF called an MTS API which returned an error.
Parameters: Error ...
Recommended Action No action is required.
Error Message OSPF-3-MTS_DROP Format: Error returned from mts_drop(), errno: %s
Explanation OSPF called an MTS API which returned an error.
Parameters: Error ...
Recommended Action No action is required.
Error Message OSPF-3-MTS_NOTIFY Format: Error returned from mts_send_notify(),
errno: %s
Explanation OSPF called an MTS API which returned an error.
Parameters: Error ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English