Send document comments to nexus7k-feedback-doc@cisco.com
2-403
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
MSDP Messages
Error Message MSDP-2-SEND_QUEUE_CORRUPT Format: Send queue corrupted for peer %s
Explanation The TCP socket send queue is corrupted. Connection to peer will be reset.
Parameters: Peer IP address ...
Recommended Action No action is required.
MSDP-3
Error Message MSDP-3-ACCEPT Format: In %s, %s failed with errmsg: %s
Explanation The MSDP process has failed to accept connection.
Parameters: Function name, TSP API, Error message ...
Recommended Action No action is required.
Error Message MSDP-3-ALREADY_RUNNING Format: MSDP already running, exiting - %s
Explanation Another MSDP process is already running, this process will shut down.
Parameters: Error message ...
Recommended Action No action is required.
Error Message MSDP-3-API_FAILED Format: %s failed in %s
Explanation The MSDP process has failed in invoking an API.
Parameters: API name, Function in which API failed ...
Recommended Action No action is required.
Error Message MSDP-3-AS_NUMBER Format: MSDP/BGP local AS number is - %s
Explanation MSDP process local AS number
Parameters: AS number ...
Recommended Action No action is required.
Error Message MSDP-3-CV_INIT Format: Couldn't init cond var %s
Explanation The MSDP process has failed to initialize a conditional-variable resource.
Parameters: Thread Name ...
Recommended Action Dump core, and then restart component.
To Next Page
Loading...
Need help?
General
