Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-575
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
RPM Messages
Error Message RM-SLOT#-2-RM_CPP_RELOAD_TMOUT: ERROR: Component ([chars]) timedout
for critical error response reloading SSM
Explanation A component has caused a critical error timeout.
Recommended Action No action is required.
Error Message RM-SLOT#-2-RM_PROCESS_FAILED: ERROR: [chars] failed
Explanation Process failed.
Recommended Action No action is required.
Error Message RM-SLOT#-2-RM_PROCESS_TMOUT: ERROR: [chars] did not complete.
Reloading Service Module
Explanation A component has caused a critical error timeout.
Recommended Action No action is required.
Error Message RM-SLOT#-2-RM_PROCESS_TMOUT: ERROR: [chars] did not complete.
Reloading SSM
Explanation A component has caused a critical error timeout.
Recommended Action No action is required.
Error Message RM-SLOT#-2-RM_VICPP_RECREATE_ERROR: All the fast path resources are
down VICPP connectivity lost
Explanation A component has caused a critical error.
Recommended Action Restart the line card.
RPM Messages
This section contains the RPM messages.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English