Send document comments to nexus7k-feedback-doc@cisco.com
2-576
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
RPM Messages
RPM-2
Error Message RPM-2-LIB_MALLOC_FAILED Format: malloc() failed for allocating %s in
%s()
Explanation RPM API library is out of heap memory
Parameters: Data, RPM Function ...
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message RPM-2-MALLOC_FAILED Format: malloc() failed for allocating %s in %s()
Explanation RPM process is out of heap memory
Parameters: Data, RPM Function ...
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message RPM-2-PPF_SES_ABORT Format: PPF session abort failed in client %s with
an error 0x%08x(%s)
Explanation RPM has detected an error during PPF abort operation.
Parameters: PPF-Client, Error code, Error message ...
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message RPM-2-PPF_SES_COMMIT Format: PPF session commit failed in client %s
with an error 0x%08x(%s)
Explanation RPM encountered a serious error while committing the verified PBR policy changes to
PBR clients
Parameters: PPF-Client, Error code, Error message ...
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message RPM-2-PPF_SES_RQST Format: PPF session request failed in client %s
with an error 0x%08x(%s)
Explanation RPM has detected an error while requesting PBR statistics from PBR clients
Parameters: PPF-Client, Error code, Error message ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
To Next Page
Loading...
Need help?
General
