Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-742
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
TSP Messages
Error Message TPC-SLOT#-5-LOG_ERR_TPC_VT_DESTROYED: VSAN :[dec] Virtual Target :
[chars] Deleted
Explanation The Virtual Target in the associated VSAN is being destroyed.
Recommended Action No action is required.
Error Message TPC-SLOT#-5-LOG_ERR_TPC_VT_VSAN_DOWN: VSAN :[dec] VT pWWN :[chars]
VSAN down
Explanation The VSAN where the Virtual Target is configured is down.
Recommended Action No action is required.
TSP Messages
This section contains the TSP messages.
TSP-3
Error Message TSP-3-INIT_PROC Format: %s%s
Explanation Failed to init process with TSP.
Parameters: Reason, Error string ...
Recommended Action No action is required.
Error Message TSP-3-INIT_THREAD Format: %s%s
Explanation Failed to init thread with TSP.
Parameters: Reason, Error string ...
Recommended Action No action is required.
Error Message TSP-3-INVALID_LOCK_INDEX Format: Lock index invalid
Explanation Lock index is invalid.
Recommended Action No action is required.
Error Message TSP-3-INVALID_THREAD_ID Format: Invalid thread id: %d
Explanation Invalid thread id.
Parameters: Thread id ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English